PSA Nitrogen Generator
PSA oxygen concentrator
Membrane separation nitrogen generator
Carbon-supported purification device
System supporting products
No Data
PSA oxygen concentrator
The pressure swing adsorption oxygen generator uses purified pre-treated compressed air as the raw material gas, which enters the adsorption tower equipped with adsorbent (zeolite molecular sieve). At different pressures, nitrogen in the compressed air diffuses through the adsorbent much faster than oxygen, resulting in oxygen concentration. After decompression, the adsorbent releases the adsorbed nitrogen and other gases, achieving regeneration. Through this alternating operation of the two adsorption towers, the required oxygen is continuously produced. The oxygen generator is mainly composed of compressed air pretreatment, compressed air buffering treatment, adsorption separation treatment, product gas buffering treatment, and control components.
Classification:
PSA oxygen concentrator
Inquiry
1. Main features:
High stability of gas supply operation
Advanced technology, environmental protection and energy saving
High-efficiency molecular sieve and technology, longer service life
One-button start and stop, simple operation and maintenance
Fast start speed, fully automatic operation;
2. Main index parameters
Gas volume: 1~500Nm3/h
Purity: about 95%
Pressure: 0.1~0.55Mpa adjustable (customized pressure according to special requirements)
Dew point: ≤-45℃ adjustable
[Note: Gas volume refers to the gas volume Nm3/h at room temperature 20℃ and 0.101Mpa]
| model | purity |
flow ( Nm3/hr ) |
Import nominal diameter DN(mm ) |
Export nominal diameter DN(mm) |
Outlet pressure (Mpa) |
| JQO-3 | 93±2% | 3 | DN15 | DN15 | 0.1-0.55 |
| JQO-5 | 93±2% | 5 | DN15 | DN15 | 0.1-0.55 |
| JQO-10 | 93±2% | 10 | DN25 | DN25 | 0.1-0.55 |
| JQO-15 | 93±2% | 15 | DN40 | DN25 | 0.1-0.55 |
| JQO-20 | 93±2% | 20 | DN40 | DN25 | 0.1-0.55 |
| JQO-25 | 93±2% | 25 | DN40 | DN25 | 0.1-0.55 |
| HJQO-30 | 93±2% | 30 | DN40 | DN25 | 0.1-0.55 |
| JQO-40 | 93±2% | 40 | DN50 | DN40 | 0.1-0.55 |
| JQO-50 | 93±2% | 50 | DN50 | DN40 | 0.1-0.55 |
| JQO-60 | 93±2% | 60 | DN50 | DN40 | 0.1-0.55 |
| JQO-70 | 93±2% | 70 | DN65 | DN40 | 0.1-0.55 |
| JQO-80 | 93±2% | 80 | DN65 | DN40 | 0.1-0.55 |
| JQO-90 | 93±2% | 90 | DN65 | DN40 | 0.1-0.55 |
| JQO-100 | 93±2% | 100 | DN65 | DN50 | 0.1-0.55 |
| JQO-110 | 93±2% | 110 | DN65 | DN50 | 0.1-0.55 |
| JQO-120 | 93±2% | 120 | DN80 | DN50 | 0.1-0.55 |
| JQO-130 | 93±2% | 130 | DN80 | DN50 | 0.1-0.55 |
| JQO-140 | 93±2% | 140 | DN80 | DN50 | 0.1-0.55 |
| JQO-150 | 93±2% | 150 | DN100 | DN50 | 0.1-0.55 |
| JQO-160 | 93±2% | 160 | DN100 | DN50 | 0.1-0.55 |
| JQO-170 | 93±2% | 170 | DN100 | DN50 | 0.1-0.55 |
| JQO-180 | 93±2% | 180 | DN100 | DN65 | 0.1-0.55 |
| JQO-190 | 93±2% | 190 | DN100 | DN65 | 0.1-0.55 |
| JQO-200 | 93±2% | 200 | DN100 | DN65 | 0.1-0.55 |
3. Strict assembly process:
During the assembly process, ensure the cleanliness of each component;
For joints, valves, pipes, containers, etc. that come into contact with oxygen, clean them before installation.
4. Service advantages:
Pre-sales: Provide process modification solutions based on the use environment, production line process, parameter requirements, etc. of the oxygen generator to effectively reduce energy consumption.
During sales: Carry out equipment process debugging, provide equipment use training, and installation technical guidance to make the equipment seamlessly connected in the production line process.
After-sales: 7✖24-hour online service, quick response within 2 hours, timely provision of emergency measures, regular organization of customer return visits, and provision of maintenance optimization solutions.
Service Advantage
Common Problem
1
2
Contact Us
You can contact us in the following four ways. Communicate with you immediately upon receiving your inquiry!
Call Us
Send Email
Message Form
Add WeChat or WhatsApp